Loading... Please wait...

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status

THE RACING INDUSTRY'S ONLY ONE-STOP SHOP FOR EVERY BEARING NEED

The Fastest Bearings In Racing!


MICROBLUE BEARINGS INC:
 WHO WE ARE & WHAT WE DO FOR YOU

We are a “racing-only” bearing company that’s dedicated to bringing you all the products and most importantly, the knowledge to help you with their use. Which includes installation, set-up, lubrication, removal and their maintenance. No other company has the resources you need, regardless of what you race. In addition, we promise to give you honest and knowledgeable advice on how to get the most amount of “go-fast” for your dollar. And about our bearings, there's nothing on the planet like them. So here's the deal, when you receive your bearings, if you don't feel they're the finest ever made, feel free to return them for a full refund, no questions asked. We're that confident.

  The Fastest Bearings In Racing 

MICROBLUE BEARINGS®: IT'S ALL ABOUT THE COATING

We are asked every day why MicroBlue bearings are "the fastest bearings in racing". And this is what we've said for over ten years, take any bearing, ball, roller, taper, it doesn't matter. Now test that bearing using say, a standard spin-down test. After you get the spin down times, send it to us, and we'll coat for you. Now test it again. We guarantee that you will see a minimum of 25% improvement in spin-down times. That's what the MicroBlue® coating does for any bearing. MORE

  The Secret To Our Bearings Is The Coating 

CERAMIC BALL BEARINGS: THE MOST EFFICIENT BEARINGS MADE

Ceramic bearings used in racing are constructed using conventional hardened steel races, but the steel balls are replaced with (much rounder and lighter) ceramic balls. We improve them by superfinishing the steel races, then we coat the races and the ceramic balls with MicroBlue®, the only coating that changes the way lubricants work. The result is the finest ball bearings available, anywhere. MORE

  These Are The Finest Bearings On The Planet

STEEL BALL BEARINGS: HIGH PERFORMANCE AT HALF THE COST

We don't have a problem saying our REM® polished and MicroBlue® coated steel ball bearings are at least as good as the other ceramics out there. Are they as good as our ceramics? No. But let's face it. It's become very expensive to go racing these days. So if you're on a budget, why not give them a try? We guarantee you'll be impressed. MORE

  High Performance At Half The Cost

TAPERED ROLLER BEARINGS: THESE THINGS ARE UNBELIEVABLE

Since ceramics are limited to ball bearings, the Friction Fighters decided to make a better taper. And our combination of MicroBlue® coated, mirror smooth races and rollers get the job done.  Better yet, since is there is no break in, they don't loosen up, which means a BIG reduction in pre-load. MORE

  These Things Are Unbelievable

ENGINE BEARINGS: THESE ARE NOT YOUR ORDINARY ENGINE BEARINGS

What if there was a coated engine bearing that truly reduced friction, and decreased wear and did that with no size change whatsoever? Not a little less friction, but a reduction that you can measure. Guess what? They cost the same as the "others". MORE

  These Are Not Your Ordinary Engine Bearings

MICROBLUE LUBRICANTS: YOU REALLY NEED TO CHECK THESE OUT

Until now, your wheel and axle lube choices has been either an "oil" of some sort or a heavy grease. That is until now. We have created four new 100% synthetic lubricants that fit right in between that oil and heavy grease. Now you have the right viscosity for your application! MORE

  MicroBlue® Application Specific Lubricants

 All MicroBlue® Products are protected by patent #: 7,232,614 

   
Back to Top